Is TBN Pacific available on-line?
Yes. We're available 24/7 for when you're on the go through TBN Pacific's website and our Apps via Apple iOS and Google Play.

How much does the Satellite install cost?
Price for full installation starts from $450.00 (depending on individual requirements).
If you already have an ex FOXTEL/AUSTAR dish not in use, you could save between $150.00 - $200.00 on the install!  

What Channels do I get?

1.   TBN Pacific
2.   Hillsong Channel
3.   ACC (Australian Christian Channel)
4.   God TV
5.   Daystar  
6.   The Word Network
7.   SBN 
8.   Angel TV
9.   3ABN
10. Amazing Discoveries
11. Hope Channel
12. EWTN
13. The Word Network
(*Channels are subject to change without notice)

I purchased a TBN receiver and need instructions on how to retune.
Please locate your model below and follow the simple instructions on how to retune your model.
Note: Satellite reception is on the Optus D2 Satellite which is only available to Australian and New Zealand viewers.

  1. In some cases you may not need to re-tune if you’ve retuned recently to TBN PACIFIC earlier in the year.
    To see if this is the case, just go through your channel list and see if you can see the words “spare” right beneath the TBN PACIFIC channel.
    If you can see the words "spare" directly under the TBN PACIFIC in your channel listing then the HILLSONG CHANNEL most likely has already been pre-tuned for you. Just select the "spare" channel with your remote and press OK. If you see a video promo of Hillsong, then you're already pre-tuned. You will need to just rename the channel to the HILLSONG CHANNEL. Just edit the channel name and rename it to HILLSONG CHANNEL.

  2. If you don’t see the “spare” directly under TBN PACIFIC in your channel listing then you will need to retune using the following parameters. Please note a Satellite HD receiver is required, if you're not sure if your model is compliant please contact us.

    THE OPTUS D2 PARAMETERS FOR TBN PACIFIC AND HILLSONG CHANNEL ARE;

    Frequency: 12546
    Polarization: Vertical
    Symbol Rate: 22500
    FEC: 3/4

    Please contact your local satellite installer if you have followed the steps above and still experience issues.

-------------------------------------------------------------

STRONG SRT 4950 - How to install TBN PACIFIC and HILLSONG CHANNEL

1. Press the menu button to open menu options. 
2. From the Installation Option select Manual Scan and press OK. 
3. Transponder table will be displayed, select the line with frequency 12546 and press okay. This will put a green tick on the selected frequency line.  
4. Press yellow button on your remote control and then select 'no' for network search and 'yes' for FTA channels search. Receiver will start searching channels and re-install the TBN PACIFIC and HILLSONG CHANNEL. You may possibly get other foreign channels as well.   
5.  After searching ends press exit key two times to clear all menus and return to normal viewing.
6. Check your channel list, TBN PACIFIC and HILLSONG CHANNEL should be now installed close to the end of your list. 
7. You can leave TBN PACIFIC and HILLSONG CHANNEL in its new position or move it to any place on the list.  Please refer to the user manual for details on how to do it. 

-------------------------------------------------------------

SONYSTAR 9988/99 - How to instal TBN PACIFIC and HILLSONG CHANNEL

1. Press the menu button to open menu options. 
2. From installation menu select 'Satellite list' and press OK. 
3. From Satellite List highlight Optus D2 and press OK to select it. (you may need to scroll down to see Optus D2 satellite)
4. Press Exit button once to return to Installation Menu 
5. From Installation Menu select Single Satellite Search  and press OK
6. From 'Single Satellite Search ' select following options

Satellite -  Optus D2
FTA only  -  Yes
Scan mode - Auto Scan
Go down to 'search' and press OK

7. Receiver will start searching channels and re-install the TBN PACIFIC and HILLSONG CHANNEL. You may possibly get other foreign channels as well. 
8.  After searching ends press OK  and exit key two times to clear all menus and return to normal viewing.
9. Check your channel list, TBN PACIFIC and HILLSONG CHANNEL should be now installed close to the end of your list. 
You can leave TBN PACIFIC and HILLSONG CHANNEL in its new position or move it to any place on the list.  Please refer to the user manual for details on how to do it.  

------------------------------------------------------------- 

STRONG SRT 4922A - How to instal TBN PACIFIC channel

1. Press the menu button to open menu options. 
2. From the installation option select manual scan and press OK. (Password is 0000)
3. From 'Manual Scan' select following options:

Satellite: Optus D2
Frequency: 12546
Search type: FTA only
Network search: OFF
Press Ok to scan

4. After searching ends press exit key two times to clear all menus and return to normal viewing.
5. Check your channel list, TBN PACIFIC should be now installed close to the end of your list. 
6. You can leave TBN PACIFIC and HILLSONG CHANNEL in its new position or move it to any place on the list.  Please refer to the user manual for details on how to do it. 

------------------------------------------------------------- 

SATKING HD600CA - How to instal TBN PACIFIC channel
1. Press the menu button to open menu options.  
2. Select ‘Antenna Setting’ under ‘Channel Search’
3. Select ‘Optus D2’ and press blue button to scan.

From 'Manual Scan' select following options:
Scan mode: Network
Crypted: FTA only
Service Type: ALL
Press Ok to scan
Press Ok to proceed. 

4. After searching ends press exit key two times to clear all menus and return to normal viewing.
5. Check your channel list, TBN PACIFIC should be now installed close to the end of your list. 
6. You can leave TBN PACIFIC and HILLSONG CHANNEL in its new position or move it to any place on the list.  Please refer to the user manual for details on how to do it. 

Retuning didn't help?Please ensure your satellite receiver is HD compliant. In most cases, an HDMI port will be seen on the rear of your unit. If an HDMI port is not seen on the rear of your unit then this is a clear sign that your receiver is an SD receiver with composite/component outputs only.
Another sign to look for is if after your retune you only hear sound but have no picture. This is another sign that your receiver is an HD receiver. You will need to purchase a new HD receiver. Please contact usto purchase a receiver.